The UT15-12-F2-4040-TA-W6 is a high heat pumping density thermoelectric module (TEM). The module is assembled with a large number of semiconductor couples to achieve a higher heat pumping capacity than standard single stage TEMs. It has a maximum Qc of 123.6 Watts when ΔT = 0 and a maximum ΔT of 72.8 °C at Qc = 0.
Electrical and Thermal Performance Curves
Y - Axis
X - Axis
Hot Side Thermal Resistance
Cold Side Thermal Resistance
Electrical Operating Points
Selected Operating Point
Cooling Power (Qc) = Watts Current = Amps Voltage = Volts Power Supply = Watts COP = Power Dissipated (Qh) = Watts Thot = °C
Cooling Power (Qc) = 22.07 Watts Current = 3.3 Amps Voltage = 4.03 Volts Power Supply = 13.3 Watts COP = 1.66 Power Dissipated (Qh) = 35.37 Watts
Cooling Power (Qc) = 97.96 Watts Current = 16.21 Amps Voltage = 15.79 Volts Power Supply = 255.91 Watts COP = 0.38 Power Dissipated (Qh) = 353.88 Watts
* Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice.
If you know your ΔT, enter that value in the box to the left of the SEARCH Button for more optimized results and click SEARCH.
Once you've selected a TEM product, you can fine tune your application requirements by altering values for voltage, current, control temp, ambient temp, ΔT, Hot Side Thermal Resistance or Cold Side Thermal Resistance and clicking the UPDATE button.
To view a different product, click the Back Button on your browser
Please use the form below to send us your web comments or to report any problems you experienced. Use our General Inquiry Form to request information on any of our products and services, or to request Technical Support.
We read all feedback carefully, but please note that we cannot respond directly to all the comments submitted.